11.07.08 | nina
Dear sir ,

This is New Young-Star Metal Co.,LTD,which is mainly produce Windlass,Anchor,Bow Roller,Anchor Chain,Marine Hardwares,etc. And we also can produce casting or stampling products from your drawings and price for you.

As our company has rich experience in this field,our copetitive price ,timely delivery time ,quality products excellent service made us have enjoyed great popularity in North America Canada, Australia, Northway, Neather Land,France,etc.And for the last 3 years,still now there have more than 20 boatbuilders of China using our windlass system and other accessories.Then please make sure our products' quality. We are looking forword to your reply.

best regards

nina

TEL:86-0546-8618928
FAX:86-0546-8616758
P.O:257000
Web:Http//www.yd-metal.com
E-mail:lixuenina@163.com

11.06.08 | Jerry Burkett
Dear Ken,

I am a boat designer and was recently awarded a patent on a planing hull concept that dramatically reduces drag. A concept boat was designed and a model built and tested to verify the concept. See Oct/Nov 2008 issue of Professional Boatbuilder Rivings section pg 19/20 for summary.

I am designing an 18' power skiff similar to the Simmons sea-skiff above the LWL, entering a contest, considering building a prototype and offerting boats for sale.

Interested in discussing an alliance where your company would build these boats similar to the J Boat program.

My office is in Richmond, but I have a house in Bath, NC. It is possible that the state would assist in development costs.

I will be traveling to Bath tomorrow, Friday 7 Nov and if you have any interest I would enjoy dropping by . My cell phone number is . I will call you when I get close to see if we should meet.

Best regards, Jerry Burkett

10.02.08 | Kate Ford
The website looks great Kenny!

09.18.08 | Sam Haraway
Good looking site Kenny. Hope all goes well in the future!

09.04.08 | James Henley
Hey website is starting to look pretty good.
Later dude.

09.04.08 | Rhonda Carder HTM2
Hello, We are out looking for a new mold for a 32, 34, 36 cat to build our new 2010 boats, we would like to know how much you charge for tooling something like this we also have a 24 sr HTM to cut up and make a deck boat out of if you can give us a price
Thanks

07.17.08 | danny searle
Hi i am a british boatbuilder with 20 years experience including carbon fibre racing yachts and americas cup components. I wondered if you would be interested in sponsoring a work visa, as i feel i could be a valued member of your team. If this is possible and you would like to see my Resume, please contact me. Thanks for your time.

06.30.08 | Brian Tabara
Just wanted to say I enjoyed the photos and the website...

05.08.08 | emmanouil koumbaras
hi, do you custom build boats or do you know someone who does? i have a project in mind: 50 feet v bottom stepped bottom, hybrid racing luxury cruiser. i will install twin lycoming turbines with BPM surface drives for high speeds 150-160mph perhaps less. withinterior rooms , glass enclosed canopy and rear entrance etc.. could you help? thanks

04.27.08 | ANTHONY McCULLOCH
I am interested in the 14' fishing tunnel made as a open skiff.

Anthony McCuloch

04.24.08 | Holger Loth
hi, I have heard you have some sst 120 or champ boats for sale? I am interested in a glass or kevlar boat, which should be competitive. Will use it in the european F2000, so cockpit must be proofed by U.I.M. Airbag system would be nice. Crash boxes will be done in Sweden.
Would be nice to hear from you,
kind regards from Denmark,
Holger

03.12.08 | david sandom
Is your sst120 still for sale?

02.16.08 | blake adams
hey uncle kenny found ya. i like the web site it could use just a little more great though.so hows the family hope to see u guys sone take care

01.04.08 | Paul Palombi
HEY, HOW'S ALL THE GUYS AT QUEST. REMEMBER ME?? WHAT-A-PACKAGE!! STUMBLED ON YOUR WEB SITE LOOKING FOR A NEW BOAT. I ALWAYS LOOK AT THE PLANS ON THE BOAT YOU BUILT. WOULD BE NICE TO HAVE ONE SCALED DOWN TO ABOUT 23' WITH SINGLE 300 HP FOR PLEASURE... HOPE ALL IS WELL, PAUL
P.S. WHERE'S OUR PHOTO? YOU NEED ONE WITH A P-1 FOR YOU SITE.

11.06.07 | Scott Toole
Kenny great to meet you this weekend!

I made it back to Toronto... thanks again for all your help this weekend!

I'm sure i can't, but if i can help with anything, let me know!

Scott Toole

11.05.07 | kenny lightfoot
Here I am

10.15.07 | Hungry termite
Shades of red are hard to read .

09.19.07 | Nick Boksa
Nice site!

Great talking to you today, Ken. Please keep us in mind for design work and pass our name around to your clients. I'll do the same!

Best,

Nick Boksa, P.E.
Boksa Marine Design, Inc.
(813) 690-0717
nick@boksamarinedesign.com
www.boksamarinedesign.com

05.09.07 | George Stronach
I'm starting a boat building business and have designed an 19' center console catamaran. The design includes drawings for the hull as well as the liner. These drawings are fairly detailed but we have no naval architect experience, and therefore need to know how the boat will ride and handle in the water. The design was done on the FreeShip free software that can be downloaded at this site http://sourceforge.net/project/showfiles.php?group_id=140466 . The design can also be exported to other files which might be easier for you, these are listed in the attachment.

We want the layout and the aesthetics of the boat to resemble our design, but we need someone to test the "hydrostatic" properties of the hull.

We'd like a ballpark price quote for
1) testing and modifying our design to ensure boat performance.
2) to convert or modify the design to a format compatible with a CNC plug builder.

Please let me know if this is something that you could do.

Thank you
George Stronach

03.12.07 | Sandra
Looking good so far.

03.07.07 | Ken Adams jr.
Please sign our guestbook & let us know what you think of the site so far. Just go to our contact page and fill out the form.

Thanks